Ideas to help you get the most from your clipart:
If
you can imagine it, there is probably a way to do it! You can combine art with
type, creating a whole new look of your own - most programs now are filled with
lots of interesting typefaces from beautiful to classic to fun and fanciful! You
can repeat just about any piece over and over for a great border, or create a
repeat pattern of two or three pieces. Any creation will look better if you keep
everything consistent. For example, use the same typeface for all of your
headings throughout a pamphlet or letter, perhaps using the same border under
each heading and /or across the bottom or top of each page. You could create a
border of a repeat pattern of three or four small pieces to use across the top
and /or bottom of a page, and then use the same small pieces separately beside
each heading, or wherever you want emphasis. Try keeping a theme throughout by
choosing pieces with similar themes. Never be afraid, however, to vary from a
theme or do something out of the ordinary - the unexpected will always attract
attention.
Keep an open mind when it comes to what to use our clip art on-it’s not just for bulletins and flyers! It can do wonders for postcards or note cards, calendars, CCD material, schedules, tickets, programs etc.,etc.,etc. You could even have one of our images with the name of your church printed on Frisbees for your parish picnic! -just imagine the possibilities!
Remember, the better the paper you print on, the better the results will be. Color can go a long way-ink has come down a lot in price and it only takes a spot of color to jazz up a whole page. Don’t forget to have fun- that’s the best way to get those creative juices flowing!
The following information will provide you with a few basics. Please check back often as we plan on adding more information over time. Click on the titles below to view the articles.
How to use Word Perfect
How to use Word/Works/Publisher
Add/Delete/Change Type
How to make a border
List of Creative Ideas
How to use our clipart with WORD PERFECT©
1) Open Word Perfect.
2) At the Menu Bar, select Insert >File
3) A Dialog box will open, on the right hand side of the Look In box, press the down arrow.
4) Select your CD-Rom drive, this is usually your D: drive, by using your mouse and the left button.
5) A list of files will appear. In the book that came with your CD is all of the artwork with file names under them (the images are in black and white and also full color, the black and white images have a b after the file name, and the full color will have a C after the file name). Find the image you want and select the associated file name using your mouse and the left button.
6) Once the image is on your screen, you can resize the image by placing your cursor over one of the black buttons at one of the four corners (you'll know when your there, the mouse will change from a pointer to a diagonal line with arrows on each end). While holding down your left mouse button, resize the image by moving the mouse. If you grab one of the black squares in the middle of the image and resize using that, the artwork will not keep its proportions and you will only change the horizontal or vertical dimensions of the image not both. Most of the times this will distort the image and it will not look good.
7) To move the image, click on the image with the left mouse button until the black squares appear around the image. Place your cursor somewhere on the image and while holding down your left mouse button, move the image where you want it.
8) Don't forget to deselect you image by placing your cursor somewhere other that on the image. If you leave the image selected, and this is the last thing your do before printing, only the image will print out. The same will hold true for type also.
9) These are some basic steps, the documentation that came with your software is a great source of information. We really like the "Word Perfect for Dummies" books, as they provide a wealth of tips and tricks.
How to use our clipart with MICROSOFT WORD©, WORKS©, and Publisher©
1) Open Word, Works, or Publisher and insert the CD-Rom.
2) At the Menu Bar, select Insert >Picture>From File.
3) A Dialog box will open, on the right hand side of the Look In box, press the down arrow.
4) Select your CD-Rom drive, this is usually your D: (could also be your M:) drive, by using your mouse and the left button.
5) A list of files will appear. In the book that came with your CD is all of the artwork with file names under them (the images are in black and white and also full color, the black and white images have a b after the file name, and the full color will have a C after the file name). Find the image you want and select the associated file name using your mouse and the left button.
6) Once the image is on your screen, you can resize the image by placing your cursor over one of the black buttons at one of the four corners (you'll know when your there, the mouse will change from a pointer to a diagonal line with arrows on each end). While holding down your left mouse button, resize the image by moving the mouse. If you grab one of the black squares in the middle of the image and resize using that, the artwork will not keep its proportions and you will only change the horizontal or vertical dimensions of the image not both. Most of the times this will distort the image and it will not look good. There are of course times you may wish to do this for a special effect.
7) To move the image, click on the image with the left mouse button until the black squares appear around the image. Place your cursor somewhere on the image and while holding down your left mouse button, move the image where you want it.
8) Don't forget to deselect you image by placing your cursor somewhere other that on the image. If you leave the image selected, and this is the last thing your do before printing, only the image will print out. The same will hold true for type also.
9) These are some basic steps, the documentation that came with your software is a great source of information. We really like the "Word (Publisher - Works) for Dummies" books, as they provide a wealth of tips and tricks.
How to Add, Delete or Change Type
If you find that perfect piece of art, but it doesn't have the right words, or no words, follow these simple step by step instructions for using the Paint program to make that picture say just what you want it to. Everyone has Paint, it comes with Windows.
First find the picture you want. It is very easy to add/change/delete the words for any black and white or full color images; however, to add/change/delete words in a diagonal banner, or that are on a painted piece of the image will require a more advanced program such as Photo Shop. So when doing this, choose an image that can be easily changed. Of course, adding type under, above or beside an image is the easiest of all.
Go to Start, Programs, Accessories, Paint. When
Paint opens, go to File, Open, then go to Look In and select your CD-Rom
drive. At the bottom of the Open dialog box, select Files of Type to
All Files and double click on the file you
want. The image will appear on the screen. Sometimes the
images open up bigger than the screen, this is okay, you will just have to
use the slide bars on the bottom and side of the screen to navigate around
the image. On the upper
left side of the screen is a small tool box (Please note, I use upper left side for this is
the normal place where it should appear. It may be elsewhere on the
screen if someone has moved it to where they like it.) . Select the image that looks like a small eraser
(that's what it is!), at the bottom of the tool box is four squares that
grow in size, that is your eraser size. The larger the square, the
more that is erased at one time. Using the eraser, erase by holding
down the left mouse button and dragging it back and forth across the
words. To do large area erases, select the Select tool (that is the
dotted line at the top of the tool box) using your left mouse button, drag
a box over/around what you want to
erase, release the left mouse button
and press the Delete key on your keyboard. If you accidentally erase part of the design, release the
left mouse button, press and hold the Ctrl key and press the "z"
key, this will back you up to the last operation (this is also known as an
Undo). I recommend that you release and push the left mouse occasionally
or you may be near the end of a large erase and make a small mistake and
have to Undo all of your hard work (message from someone who was
there!). So now the words are gone! Okay back to the
tool box and select the "A" tool. If you want to make your
text a color, there is a palette at the bottom of the screen, left click on
the color you want. Move the cursor to the
area where you want text, press and hold the left mouse button and drag
open a dialog box. A small text box will appear that will let you
choose a type font, point size, and any special effects. The Point
Size selection list appears to be small, but you can left mouse button
cursor over top of the Point Size number and enter your
own Point Size . Select any
of special effects you may want like Bold, Underlined, Italic or none. Place your cursor inside of the textbox, left mouse
button click one time, and then start typing. If it's not big enough or too small,
press Ctrl and "z" and try it again. When I was entering
text, I found that sometimes the Text Box would expand and cover part of
the design. Before I finished entering text, I placed my cursor on
the bottom of the Text Box, my pointer changed to a line with arrows at
the top and bottom, hold down the
left mouse button and resized the Text Box so that the box stayed inside
of the banner. When you have entered your text, place the cursor
outside of the box and hit the left mouse button. If the text is not
centered, using the Select Tool, drag a box around the text, place the
cursor inside of the box, it will change to a four sided arrow, hold down
the left mouse button, and place the text right were you want it. Save your new creation so you can insert it into a document at
a later time.
Please don't erase our copyright symbol. When you change a piece of artwork in any way, it is called a Derivative work. Our copyright expressly reserves our rights to these works and at no time should our copyright symbol be removed or altered. Thanks!

Go to Start, Programs, Accessories, Paint. When Paint opens, go to File, Open, then go to Look In and select your CD-Rom drive. At the bottom of the Open dialog box, select Files of Type to All Files and double click on the file you want (if you are going to use more than one image, just repeat this step as many times as you need). Open Paint again, this is were you will place your finished border. Go to Image, Attributes and set width to a value greater than the combined image or images your are going to be using. You can always make the image smaller when you are done. Go to the first image you want (by selecting the Paint button on the Navigation bar at the bottom of your screen), press and hold the Ctrl button while you press the "a" key, continue to hold the Ctrl key and press the "c" key. Now go to the Paint window where you will be making your border, press and hold the Ctrl key and then press the "v" key. The image will appear on your screen, place your cursor in the middle of the image, press and hold the left mouse button and move the image to where you want it. Once you insert the next piece you won't be able to move the first image as easily, so try and get it where you want it. Now continue to add pieces to your border. When you are done, save your image. We recommend that you save your image in 24-bit BMP format, this will give you the highest quality. If you are working in your word processor, you can simply press and hold the CTRL button and press the "a" key and then the "c" key. Go to your word processing program and then press and hold the CTRL button and press the "v" key and this will insert the image for you. See above on how to resize the image.


These are only a fraction of the things you can do with our clipart, from the obvious to the unusual. This list can help spark your imagination to inspire your own ideas or give you the creative solution you may have been looking for. If you come up with some we've missed, please let us know so we can share them here with others.
Sunday
BulletinPersonal Stationary Posters Flyers Post Cards Note Cards Bulletin Board Decor |
Program
coversName Tags T-Shirts Bumper Stickers Invitations Award Certificates Letter Head |
Tote
BagsRubber Stamps Greeting Cards Decals Silk Screening Promotional Items and so much more! |
Holy
CardsCommemorative Cards Coloring Sheets Stickers Calendars Announcements Banners |
SignsFlags Window Clings Tickets Cook Books Envelopes Book Covers |
|
NewslettersReports School Papers Gift Tags Recipe Cards Wrapping Paper Jelly Jar Labels |
MagnetsPrice Tags Business Cards Puzzles Scrap Books Prayer Books Buttons |

E-Mail questions or comments to george@catholicartworks.com
Copyright ©
2002 Nippert & Co ARTWORKS. All rights reserved.
Revised: June 21, 2008
Catholic, Catholic Art Work, Catholic Artwork, Catholic Art Works, Catholic Artworks, Catholic Clip Art, Catholic Clipart, Catholic Educational Material, Teacher's Helper, Teachers Helper, the teacher's helper, the teachers helper, Catholic Sacrament, Catholic Sacraments, The Creative Catholic, Creative Catholic, An Alphabet of Saints Poster, an alphabet of saints poster, an alphabet of saints book, An Alphabet of Saints Book, Catholic Saints Alphabet, catholic saints alphabet, an alphabet of catholic saints, An Alphabet of Catholic Saints, an alphabet of catholic saints book, An Alphabet of Catholic Saints book, Catholic Art, catholic art, Catholic Artworks Volume 1, Catholic Artworks Volume 2, Faith Keepers, Faith Keepers Collection 1, Faith Keepers Collection 2, Faith Keepers Collection 3, Rosary, Rosary Art, Mysteries of the Rosary, Luminous Mysteries, Glorious Mysteries, Joyful Mysteries, Sorrowful Mysteries, Mysteries of Light, Rosary Clip Art, Rosary Clipart, Catholic Poster, Nippert, George Nippert, Brenda Nippert, Nippert & Co, Nippert Artworks, Nippert Artwork, Nippert and Co Artworks, Nippert & Co Artwork, Nippert Catholic Art Work, Nippert Catholic Artwork, Nippert Catholic Artworks, Nippert Catholic Art Works, Baptism Clipart, Baptism Art Work, Baptism Artwork, Baptism Clip Art, Reconciliation Clipart, Reconciliation Clip Art, Reconciliation Art Work, Reconciliation Artwork, First Communion Art Work, First Communion Artwork, First Communion Clip Art, Communion Clipart, Confirmation Art, Confirmation Art Work, Confirmation Artwork, Confirmation Clip Art, Confirmation Clipart, RCIA Art, RCIA Art Work, RCIA Artwork, RCIA Clip Art, RCIA Clipart, Holy Orders, Holy Orders Art, Holy Orders Art Work, Holy Orders Artwork, Holy Orders Clip Art, Holy Orders Clipart. Holy Cards, Catholic Saints Holy Cards, Catholic Holy Cards, Catholic Saints, Saints, Jesus, Mary, Joseph, St Mary, Saint Mary, St Joseph, Saint Joseph, Saint Joe, Resurrection, Assumption, His Sacred Heart, Her Immaculate Heart, Catholic Teacher, Catholic Teachers, Catholic Teacher Aids, Catholic Teachers Aids, DRE, DRE Art, DRE Art Work, DRE Artwork, Catholic Home School, Catholic Home School Supplements, Catholic Home School Coloring Sheets, Catholic Home School Art, Catholic Home School Art Work, Catholic Home School Artwork, Catholic Home School Clip Art, Catholic Home School Clipart, Catholic Church Art, Catholic Church Art Work, Catholic Church Artwork, Catholic Church Clip Art, Catholic Church Clipart, Saint Mary, Saint Joseph, Saint Francis, Saint Elizabeth Ann Seton, Catholic Home School, Catholic Home School Educational Material, Catholic Home School Art, Catholic Home School Conference, NACHE, IHM Conference, ECC, NCEA, Joseph's Heartprint, Joseph's Heart Print, Joseph's Heartprint Publishing, Josephs Heart Print Publishing, ISBN 0-9787035-0-2, ISBN 0-9787035-1-0, ISBN 0-9787035-2-9, ISBN 978-0-9787035-0-9, ISBN 978-0-9787035-1-6, ISBN 978-0-9787035-2-3